View and Download Honeywell 2020-5 user manual online. Cordless System. 2020-5 Barcode Reader pdf manual download. Also for: 2020-5b, 2020, 3820, 3820i. Once you scan this bar code, the image scanner is unlinked from the base and must be placed into the base to re-link. Multiple Image Scanner Operation Note: Multiple Image Scanner Operation.
- Follett Barcode Scanner
- Follett 6300 Scanner Manual
Fast, accurate circulation and inventory
The 5100 high-performance barcode scanner from Follett Software makes circulation and inventory management fast and easy.
Follett Barcode Scanner
- Compatible: Follett Firmware ensures accuracy, full functionality and compatibility with Follett Software products.
- Fast: Fast, accurate reads on labels of any quality with up to 270 scans per second.
- Accurate: Scans from up to 18 inches away. Linear imager technology reads standard 1D barcodes from any orientation.
- Versatile: Easy to aim and scan in any lighting condition, from darkness to full sunlight. Covers a wide range of barcode symbologies.
- Reliable: 5 Year Manufacturer's Warranty.
The Follett 5100 Barcode Scanner includes: Scanner mount
USB cable
5-year manufacturer's warranty | Works with: Destiny® Library Manager™
Destiny Textbook Manager™
Destiny Media Manager™
Destiny Asset Manager™
Circulation Plus®/Catalog Plus®
InfoCentre™
Spectrum™
Athena™ |
Follett 6300 Scanner Manual
Help setting up the new wireless Follett scannersHaving some issues with your new wireless scanner? The setup can be confusing. Here's how it should look!
With a solid blue light on the base.
To make sure you have yours set up correctly, follow the steps below.
First, make sure you have the scanner, cradle, the two USB cords included with the scanner, and the USB power block. Second, make sure you have inserted the included battery into the base of the scanner. Third, plug in the power USB cord. It's the one I'm pointing to here, in the center on the bottom of the cradle. Fourth, connect the other end of the cable into the USB power block, then plug it into a power outlet. This is the cable which provides power, and while you can plug it into a computer to provide power, some USB ports do not provide enough. Wall outlets also will charge the scanner faster. For these reasons, I advise plugging it into a standard power outlet with the included USB power block. Fifth, plug in the other USB cable, the one that ends in an ethernet cable plug. It slides in and clips into place where I am pointing below. Sixth, take the other end of the cable you just put in place and plug it into the USB port of the computer that will use the scanner. Seventh, put the cradle down flat and set the scanner onto the charging prongs. You should now let the scanner charge, which may take up to four and a half hours. When the scanner is fully charged, the green light on top of it will be solid - it should blink while charging. You should now be able to scan normally. If you can not, contact Library Services. As another bit of reference, common errors can be judged by the status of the blinking lights on the cradle. Red and blue continuous flashing means no power and scanner is disconnected from cradle. Steady red and blue means the radio is connected, but no power to the cradle. Red and blue interchanging means USB communication failure. Blue flashing means scanner is disconnected from cradle. Created by Jim Hepler |
|
- Hardware and Scanning Inventory On-Demand eLearnings. Follett Remote. Installing and Downloading Follett Remote; Using Follett Remote for Offline Circulation; Follett 7100. Getting started with the Follett 7100 Wireless Scanner; Using your 7100's Wireless Connection with Library Manager; Using Follett Remote and Your 7100 with Library Manager.
- Seventh, put the cradle down flat and set the scanner onto the charging prongs. You should now let the scanner charge, which may take up to four and a half hours. When the scanner is fully charged, the green light on top of it will be solid - it should blink while charging. You should now be able to scan normally.